Fireye SP-48-NG-ND-1.2 SureFire Pilot Igniter

$1,763.42

The Fireye SP-48-NG-ND-1.2 is a natural-draught gas pilot igniter that establishes a stable flame for lighting oil- and gas-fired main burners. It operates intermittently or continuously, with a 1.2 m (3.93 ft) insertion length and a 48 mm outer diameter.

Contact us for lead times on SP-48-NG-ND-1.2

SKU: SP-48-NG-ND-1.2 Category: Brand:

Description

  • Natural Gas Capacity: Delivers 20–46 kW at 20–80 kPa gas pressure.
  • Natural Draught: Regulates combustion and cooling air with a sliding sleeve.
  • Pilot Dimensions: Has a 1.2 m (3.93 ft) insertion length and 48 mm OD.
  • Dual Operating Modes: Runs in intermittent light-off or continuous service.
  • Ignition Compatibility: Accepts HESI or HTI ignition rods up to 16 mm OD.

Technical Specifications

Manufacturer Fireye
Part Number SP-48-NG-ND-1.2
Type Pilot Igniter
Series Surefire II
Fuel / Draft Natural Gas, Natural Draught
Insertion Length 1.2 m (3.93 ft)
Air Tube Diameter 48 mm OD
Capacity 20–46 kW at 20–80 kPa
Material 304/316 stainless steel
310/330 heat-resistant steel
Operating Temp 300°C maximum continuous
500°C at the stabilizer and gas/air tube ends
Gas Connection 1/2" BSP Female

Request a Quote

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

Description

The Fireye SP-48-NG-ND-1.2 is a SureFire II natural-gas pilot igniter that establishes the flame used to light oil- and gas-fired main burners. Used in industrial heaters and boilers, it has a 1.2 m (3.93 ft) insertion length and a 48 mm outer-diameter air tube. Its natural gas capacity ranges from 20–46 kW at 20–80 kPa.

A 1/2" BSP female inlet feeds natural gas to the orifice-stabilizer assembly, where a small gas flow mixes with air and ignites near the stabilizer plate. The sliding sleeve adjusts natural-draught combustion and cooling air entering the tube. The pilot accepts separately ordered HESI or HTI ignition equipment with rods up to 16 mm OD.

Frequently Asked Questions

What mounting options are available for the Fireye SP-48-NG-ND-1.2 pilot igniter?

The pilot air tube can be welded directly to a burner plate or installed using an optional mounting tube.

What is the natural gas operating capacity of the Fireye SP-48-NG-ND-1.2?

The SureFire II pilot operates at 20–46 kW with a natural gas pressure of 20–80 kPa.

Does the Fireye SP-48-NG-ND-1.2 come with a high-energy spark igniter?

No. The pilot supports HESI or HTI ignition equipment, which must be ordered separately.