Siemens 6AV2124-0GC01-0AX0

Siemens 6AV2124-0GC01-0AX0 SIMATIC HMI TP700 Comfort

$1,723.00

The Siemens 6AV2124-0GC01-0AX0 is a SIMATIC HMI TP700 Comfort Panel with a 7-inch widescreen TFT touchscreen for industrial process visualization. Its PROFINET and MPI/PROFIBUS DP interfaces bridge both current and legacy Siemens controllers without requiring additional gateways or hardware conversion.

SKU: 6AV2124-0GC01-0AX0 Category: Brand:

Description

  • Dual Connectivity: Bridges PROFINET and MPI/PROFIBUS DP simultaneously.
  • Front Panel Protection: Carries an IP65 rating against contaminants.
  • Extended Backlight Life: Delivers 80,000-hour MTBF at 25°C.
  • WinCC TIA Compatibility: Configures from WinCC Comfort V11 onward.
  • Multi-Protocol Support: Connects to Allen Bradley, Mitsubishi, and Modicon.

Documentation

Technical Specifications

Manufacturer Siemens
Part Number 6AV2124-0GC01-0AX0
Type HMI Comfort Panel
Series / Model SIMATIC, TP700 Comfort
Display 7-inch widescreen TFT
800 × 480 px
16 million colors
Analog Resistive Touchscreen
Operating System Windows CE 6.0
IP Rating IP65 (front), IP20 (rear)
Ethernet Interface 1x Industrial Ethernet
PROFINET
Serial Interface 1x RS 422/485 (MPI/PROFIBUS DP)
Supply Voltage 24 V DC

Request a Quote

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

Description

The SIMATIC HMI TP700 Comfort Panel delivers industrial process visualization and operator control through a 7-inch widescreen TFT touchscreen with an analog-resistive surface. It runs Windows CE 6.0 and configures through WinCC Comfort V11 or higher, with support for up to 2,048 process variables and 500 configurable screens.

Its 800 × 480 pixel display renders 16 million colors, with the backlight fully dimmable from 0 to 100 percent and rated at 80,000 hours MTBF at 25°C. That front panel is aluminum and IP65-rated, housing a built-in two-port Ethernet switch alongside a combined RS 422/485 serial port for MPI and PROFIBUS DP connections.

Frequently Asked Questions

What software is required to configure the Siemens 6AV2124-0GC01-0AX0?

WinCC Comfort, Advanced, or Professional (TIA Portal) from V11 onward is required. WinCC flexible and earlier STEP 7 tools are not supported.

What is the IP protection rating of the SIMATIC HMI TP700 Comfort Panel?

The front panel is rated IP65 and NEMA 4/4X, suitable for environments with dust and water spray. The rear panel is rated IP20.

Which third-party PLCs can the TP700 Comfort communicate with?

It supports Allen Bradley (EtherNet/IP and DF1), Mitsubishi, Modicon Modbus, and OMRON via Host Link, plus OPC UA client and server connectivity.

Related products