Fireye E110 Burner Control Assembly
$1,475.00
The Fireye E110 is a 120 VAC microprocessor-based burner management control that sequences ignition and supervises flame on oil, gas, and combination fuel burners. Swappable programmer and amplifier modules set purge timing, trial-for-ignition, and UV, infrared, or flame rod scanning.
4 in stock
Description
- Modular Design: Uses interchangeable programmer and amplifier modules.
- Multi-Fuel Control: Sequences oil, gas, and combination fuel burners.
- Scanner Support: Accepts UV, infrared, flame rod, and self-check UV scanners.
- Nonvolatile Memory: Retains operating history and status.
- Modbus RS-485: Provides built-in multi-drop communication.
- Retrofit Base: Fits E100, D-Series, and C-Series wiring bases.
Documentation
Technical Specifications
| Manufacturer | Fireye |
|---|---|
| Part Number | E110 |
| Series | Flame-Monitor |
| Type | Burner Management Control |
| Voltage | 120V AC, 50/60 Hz |
| Communication | Modbus RS-485 |
| Power Draw | 25 VA |
| Max Connected Load | 2000 VA |
| Operating Temperature | -40°F to 140°F (-40°C to 60°C) |
| Agency Approval | UL Listed, FM Approved, UL Certified for Canada |
Request a Quote
"*" indicates required fields
Description
The Fireye E110 is a microprocessor-based burner management control that programs the burner/blower motor, ignition, and fuel valves on automatically ignited oil, gas, and combination fuel burners. It works with limit and operating controls to deliver proper burner sequencing and reports operating status and lockout information following a safety shutdown.
Interchangeable programmer and flame amplifier modules set the control function, timing, and flame scanning means for ultraviolet, auto-check infrared, flame rod, and self-check ultraviolet scanners. Nonvolatile memory retains history and position through power interruptions, while Modbus RS485 communication and the eighteen-terminal wiring base serve motors, valves, transformers, and multiple interlock circuits.
Frequently Asked Questions
What does the Fireye E110 replace or interchange with?
The Fireye E110 uses the same 18-terminal wiring base as the Fireye E100 Flame-Monitor, D-Series, and C-Series controls, making it directly interchangeable with most models without rewiring.
What flame scanners work with the Fireye E110?
The Fireye E110 supports ultra-violet, auto-check infrared, flame rod, and self-check ultraviolet scanners, selected by installing the matching flame amplifier module.
Does the Fireye E110 include a display module?
No. The Fireye E110 consists of the EB700 chassis, EC600 dust cover, and mounting screw. The ED510 display module is ordered separately and is required with EP programmers.
