Honeywell Modutrol IV Series 62 rotary actuators are 24 VAC floating-control motors with built-in feedback potentiometers for proportional positioning of dampers and valves. Featuring adjustable stroke, dual-end shafts, optional spring-return, and quick-connect terminals, they deliver precise control in HVAC, burner modulation, and industrial valve applications.
Honeywell Modutrol IV Series 62 floating rotary actuators feature built-in, electrically isolated feedback potentiometers for precise closed-loop monitoring and master/slave cascading applications. Because selecting the right replacement model requires matching control voltage (24VAC vs. 120VAC), torque output (35 to 300 lb‑in), spring-return fail-safe action, and feedback resistance (typically 135 Ω), verifying technical parameters is critical. Contact our technical sourcing team today to locate your exact replacement or cross-reference legacy models.
Series 62 actuators combine 3-wire floating control logic with an internal feedback potentiometer housed inside a rugged, NEMA 3 die-cast aluminum enclosure. Use this matrix to compare fail-safe mechanisms, torque capacities, and common Series 62 model configurations.
| Actuator Class | Control & Feedback Logic | Common Series |
|---|---|---|
| Standard Spring-Return Series 62 | 24VAC or 120VAC 3-wire floating actuators delivering 35 lb‑in or 60 lb‑in torque with mechanical spring-return fail-safe and 135 Ω feedback potentiometer. | M6284A1055, M6285A1005 |
| Non-Spring Return Series 62 | Floating 3-wire non-spring return motors that hold position on power interruption while maintaining continuous potentiometer shaft feedback. | M6282A1016, M6282A1008 |
| High-Torque Fail-Safe Series 62 | Heavy-duty 150 lb‑in to 300 lb‑in spring-return actuators engineered for large multi-blade air handlers, industrial dampers, and heavy valve bodies. | M6294A1010, M6294D1008 |
Closed-Loop Floating Valve Control Package
Master-Slave Cascading Damper Assembly
Feedback Potentiometer & Slaving Wiring Alert: The internal potentiometer on Series 62 actuators is electrically isolated from motor power circuits. When wiring position feedback to a controller or slaving secondary actuators, confirm that the potentiometer wiping direction matches control logic to prevent erratic hunting or out-of-sync stroke positioning.
Honeywell Series 62 Modutrol IV motors bridge floating 3-wire control with electronic position verification. The integral 135 Ω potentiometer acts as an accurate shaft position sensor, sending continuous analog feedback to BMS controllers without adding external position transmitters.
When driving large air handling mixing boxes or multi-section damper banks, a single Series 62 master actuator can drive secondary slave motors in perfect unison. Utilizing the master unit’s isolated potentiometer ensures synchronized travel across all dampers, preventing air bypass or pressure imbalances.
Unsure of your control voltage, feedback resistance, or torque requirements?
Take a snapshot of your existing motor nameplate, wiring diagram, or damper setup, and our technical sales team will verify the exact replacement match.
Fill in the form below, or call us now at 1-800-755-2883
"*" indicates required fields
