| Number of analog outputs |
8 |
| Input, current |
No |
| Input, voltage |
No |
| Input, resistor |
No |
| Input, resistance thermometer |
No |
| Input, thermocouple |
No |
| Output, current |
Yes |
| Output, voltage |
Yes |
| Analogue inputs configurable |
No |
| Analogue outputs configurable |
Yes |
| Type of electric connection |
Screw-/spring clamp connection |
| Capacitive load, max |
1 μF (voltage mode only) |
| Inductive load, max |
1 mH (current mode only) |
| Module keying |
Electronic keying via programming software |
| Scan time |
Per group 0…3: 1 ms, Per group 0…7: 2 ms |
| Step response time to 63% of value |
Voltage mode: 18 μs max, Current mode: 1 ms max |
| Module conversion method |
R-Ladder DAC, monotonicity with no missing codes |
| Outputs |
8 voltage or current |
| Open circuit detection |
Current mode only |
| Drive capability |
Voltage: 1000 Ω minimum, Current: 500 Ω maximum |
| RTB torque |
5069-RTB18-SCREW RTB only: 0.4 Nm (3.5 lbin) |
| Overvoltage protection, max |
±32V DC |
| Short circuit detection |
Voltage mode only – output electronically limited to 16 mA or less |
| Data format |
IEEE 32-bit floating point |
| Wire category |
2 – shielded input ports, 2 – power ports, 1 wire per terminal for each signal port |
| Power dissipation, max |
5.3 W |
| Indicators |
1 green/red module status indicator, 8 yellow/red I/O status indicators |
| Thermal dissipation, max |
18.1 BTU/hr |
| Accuracy drift with temperature |
Voltage: 0.30% full scale, Current: 0.50% full scale |
| Resolution |
16 bits across ±10.5V – 320 μV/bit, 16 bits across 10.5V – 160 μV/bit, 16 bits across 5.25V – 80 μV/bit, 16 bits across 21 mA – 320 nA/bit |
| Wire size |
5069-RTB18-SPRING removable terminal block: 0.5…1.5 mm² (22…16 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 2.9 mm (0.11 in.), max diameter including insulation, 5069-RTB18-SCREW removable terminal block: 0.5…1.5 mm² (22. |
| Calibrated accuracy |
Voltage: 0.10% full scale @ 25 °C Current: 0.10% full scale @ 25 °C |
| Suitable for safety functions |
No |
| Repeatability |
0.05 % |
| Conversion time |
Per channel: 25 µs |
| Output range, current |
0…20 mA, 4…20 mA |
| Output range, voltage |
±10V, 0…10V, 0…5V |
| Calibration methods |
Factory calibrated, User-performed (optional) |
| Insulation stripping length |
5069-RTB18-SPRING connections: 10 mm (0.39 in.), 5069-RTB18-SCREW connections: 12 mm (0.47 in.) |
Features