PLC

The Allen-Bradley 1769-CRR1 is an expansion cable that connects an I/O bank to another I/O bank and comes with terminating caps. To be specific, this expansion cable allows users to connect the right I/O bank to another right I/O bank. The entire 1769-CRR1 expansion cable measures approximately 305 mm or 1 foot from end to end and the terminating caps have dimensions of 0.71 x 4.65 inches or 18 x 118 mm. Note that this expansion cable can be used

The Allen-Bradley 1769-CRL3 is a compact I/O cable for the DriveLogix 5730 Controller. The 1769-CRL3 is not a module or a power supply, but rather a cable to connect banks or group of modules. It is a right bank-to-left bank expansion cable type that makes extensions for the bus communication lines. The 1769 system can only use 2 cables at most, allowing for 3 banks of I/O modules with their own power supply. The 1769-CRL3 measures 3.28 feet and is

The 1769-CRL1 right-to-left cable is a product from Allen-Bradley/Rockwell Automation that is manufactured as part of the CompactLogix and MicroLogix 1500 product series. This module type of expansion cable features a right-to-left connection, measures 1 foot or 305 millimeters in length and it has an isolation voltage of 30 Volts or 30 Volts continuous voltage. It also comes with a backplane current of 1.4 Amps at 24 Volts, a power consumption of 33.6 Watts, and a power dissipation of 7.5

The Allen-Bradley 1769-BOOLEAN comes with an LED display and an open-type enclosure. It measures 3.34 inches in depth, 4.65 inches in heightand 1.38 inches in width, and it weighs approximately 0.625 lb. It has a 10-30V DC input signal and a 20.4 – 26.4V DC output signal. It features a closed loop time of 1 microsecond and it can mount on a DIN-rail or panel mount. The 1769-BOOLEAN module is a combination of 24V DC input/output.  Its outputs can be controlled using Boolean

Allen Bradley 1769-BA Battery Asssembly CompactLogix for program memory and data backup 3VDC @ 850 MAH Lithium   Request a Quote now or call us at 1-800-755-2883 for expert assistance. TCI Supply is not an authorized Allen Bradley Distributor Technical Data .pdf

Allen Bradley CompactLogix 2 Channel RS232-RS485-RS422 ASCII Communication Module.   The Allen-Bradley 1769-ASCII is a 1769 CompactLogix and MicroLogix 1500 compatible module. This specialty provides connection to devices that supports American Standard Code for Information Interchange (ASCII) protocol. Typical devices that utilize this protocol are Barcode Readers which are commonly installed in factory automation applications. The 1769-ASCII has Two (2) individually isolated ASCII ports. Each port may function simultaneous at different configuration and communicate to different set of devices. The

The Allen Bradley Address Reserve I/O Module can be used with both CompactLogix and MicroLogix Processors. It has a current draw of 60 mA at 5.1V and a heat dissipation max of .3 Watts.   The Allen-Bradley 1769-ARM module reserves and replaces module slots. It begins to operate after it creates an I/O configuration and a user program that removes all further configuration to that module. Program references for the slot position that the 1769-ARM module occupies must not use another module’s parameters. The 1769-ARM has a

The Allen-Bradley 1769-AENTR EtherNet/IP Adapter has 10/100 Mbps Communication Rate and 128 EtherNet/IP connections Logix Resources.   The Allen-Bradley 1769-AENTR is a chassis-based input/output module that belongs to the Bulletin 1769 Compact I/O series. This module has the ability to help users reduce an I/O spare parts inventory. Distributed by the EtherNet/IP network, this I/O module permits CompactLogix consumers to utilize the 1769 I/O system again when upgrading to the next series of CompactLogix controllers without interfering with their previous

The Allen-Bradley 1769-ADN is a CompactLogix I/O DeviceNet Adapter module. It is an open, low-level network module that connects simple industrial devices such as actuators and sensors with high-level devices such as computers and PLC controllers. It uses the well-known Common Industrial Protocol (CIP) that provides various capabilities such as control, data collection, and configuration for industrial devices. It connects low-level devices directly to plant floor controllers instead of interfacing them through I/O modules. Data is sent as needed through

The 1769-2WS is a CompactLogix compatible module that is manufactured by Hardy Process Solutions, a Rockwell Automation Silver Technologypartner company. This module is a dual-channel weigh scale module and supports theconnection of up to Eight (8) load cells / Points. The 1769-2WS has a backplane power consumption of < o.5 Ampere at 5VDC power supplied by the backplane. This module accepts -0.3mV through +15.3 mV signals and sense +5Vdc while the module output is 5VDC excitation voltage. It has a