Request a Quote
Search

Honeywell Modutrol Motors

Honeywell Mod Motors

The Honeywell Modutrol IV Actuator Motors rotary motors can be set to fail safe mode to Non-Spring Return (NSR) or Spring Return, Two Position.

Application:

The Series 72 Modutrol IV Motors are used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve at any point between open and closed. All models have auxiliary switch cams.

The Series 41 and Series 81 Modutrol IV Motors are 2-position (line- and low- voltage, respectively) spring-return motors. They are used to operate dampers or valves in applications where it is necessary or desirable to have the controlled element return to the starting position in the event of power failure or interruption.

Series 90 Control Circuit – 135 ohm, Series 90 proportioning controller. Series 90 high or low limit controller with manual minimum position potentiometer (with a combined total resistance of up to 500 ohms) can also be used in the control circuit. These Modutrol Motors are reversing, proportional motors used to operate valves or dampers in electric (Series 90) modulating circuits.

Ask us for engineering or product support.

Large Johnson Controls Logo on white background

Johnson Controls V47AS-2 Modulating Water Valve

The Johnson Controls V47AS-2 is a 2-inch temperature-actuated modulating water valve designed for regulating water flow in heating systems. It operates with a temperature range of 160°F to 205°F and features a cast iron body for durability. This direct-acting valve is equipped with a 6-foot capillary and a 10-inch bulb, making it ideal for controlling water flow in heat exchangers and other temperature-sensitive applications. Its robust construction and precise temperature control make it a reliable choice for industrial and commercial

Read More »
Medium Honeywell logo with white background

Honeywell Modutrol IV Motor M6184D1001

Description The Honeywell Modutrol IV Motor M6184D1001 is a non-spring return floating control motor from the Series 61 line. Designed for use with controllers that provide switched SPDT or floating outputs, this motor is ideal for operating dampers or valves in various HVAC applications. It features a three-wire, low voltage SPDT input signal and operates on a 24 Volts AC power supply. The motor’s timing ranges from 15 to 30 seconds with a stroke of 90 to 160 degrees. Upon

Read More »
Medium Honeywell logo with white background

Honeywell M6284A1071-S 120V Non-Spring Return Foot Mounted Actuator

Description Note: To directly replace this item, please purchase each of the following: M6284F1013-S, 220741A2-62, and 50017460-003. These Series 62 Modutrol IV Motors non-spring return floating control motors are used with controllers that provide a switched spdt or floating output to operate dampers or valves. These motors also have an internal electrically isolated feedback potentiometer that provides indication of the motor shaft position some models can be used for slaving Series 90 Motors. Features Integral junction box provides NEMA 3

Read More »
Medium Honeywell logo with white background

Honeywell Modutrol IV Motor M9185A1018

Description The Honeywell Modutrol IV Motor M9185A1018 is part of the Series 90 Modutrol Motors, designed for spring return modulating proportional control of dampers or valves. This motor works with controllers that provide a Series 90 output. It features a proportional reversing actuator with a 135-ohm input signal, ensuring precise control. Powered by a 24V AC supply, the motor operates with a 60-second timing and a 160-degree stroke. The normal position is normally closed, both mechanically and electrically, and it

Read More »
Medium Honeywell logo with white background

Honeywell M944D1017 Modutrol IV Motor

Description The Honeywell M944D1017 Modutrol IV Motor is a 24V, 50/60 Hz motor designed for precision control in HVAC systems. With a power rating of 18 watts and a current draw of .88 amps, this motor ensures efficient operation. It features a non-spring return mechanism, providing reliable positioning of dampers and valves. The motor’s design supports integration with a variety of controllers that offer a switched or floating output. Its robust construction and reliable performance make it suitable for demanding

Read More »
Medium Honeywell logo with white background

Honeywell Modutrol IV Motor M4185A1001

Description Note: To directly replace this item, please purchase both M8185D1006 and 50017460-003 Series 41 and Series 81 Modutrol IV motors are 2-position (line- and low-voltage per motor control) spring-return motors. They are used to operate dampers or valves in applications where it is necessary or desirable to have the controlled element return to the starting position in the event of power failure or interruption. Modutrol IV Two-Position Spring Return Actuator, Two-Wire, Line Voltage, SPST Input Signal Power Supply: 120

Read More »
Medium Honeywell logo with white background

Honeywell M4185B1058 Modutrol IV Motor

Description The Honeywell T7300A1005 thermostat is a multistage control unit designed for both conventional and heat pump systems, operating at 24VAC with a 50/60Hz frequency. It provides precise temperature regulation, ensuring comfort and efficiency in various HVAC applications. This thermostat includes a transformer and requires a subbase for installation. The device is ideal for managing complex heating and cooling configurations, offering reliable and accurate control. Its robust design and the inclusion of the trusted Honeywell logo ensure long-lasting performance and

Read More »
Medium Honeywell logo with white background

Honeywell M6284D1032-F Modutrol Motor with Linear 10K feedback

Description The Honeywell M6284D1032-F Modutrol IV Motor is a non-spring return floating control motor designed for precise control of dampers and valves. This motor works with controllers that provide a switched SPDT or floating output, making it versatile for various applications. It features an internal electrically isolated 10K feedback potentiometer, which accurately indicates the motor shaft position. This feedback mechanism ensures precise positioning and control, enhancing system reliability and efficiency. The M6284D1032-F is compatible with slaving Series 90 Motors, offering

Read More »

Get A Quote

Fill in the form below, or call us now at 1-800-755-2883

Full Product Catalog

See our comprehensive product catalog!

View Catalog

Tag: Honeywell Modutrol Motors

Your Solutions Today

611 Morgan Avenue
Drexel Hill, PA 19026
(800) 755-2883

 

[email protected]

Product Search
Search
Model Selection Guide Library
Returns
PRIVACY POLICY
Products By Manufacturer
Categories
Follow Us
Linkedin Instagram Facebook

©2024 TCI Supply. All Rights Reserved. 611 Morgan Ave. Drexel Hill, PA 19026