Search

Modulating Motors

Honeywell Mod Motors

The Honeywell Modutrol IV Actuator Motors rotary motors can be set to fail safe mode to Non-Spring Return (NSR) or Spring Return, Two Position.

Application:

The Series 72 Modutrol IV Motors are used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve at any point between open and closed. All models have auxiliary switch cams.

The Series 41 and Series 81 Modutrol IV Motors are 2-position (line- and low- voltage, respectively) spring-return motors. They are used to operate dampers or valves in applications where it is necessary or desirable to have the controlled element return to the starting position in the event of power failure or interruption.

Series 90 Control Circuit – 135 ohm, Series 90 proportioning controller. Series 90 high or low limit controller with manual minimum position potentiometer (with a combined total resistance of up to 500 ohms) can also be used in the control circuit. These Modutrol Motors are reversing, proportional motors used to operate valves or dampers in electric (Series 90) modulating circuits.

Ask us for engineering or product support.

Honeywell M8185D1006 Modutrol IV Motor, Non-Spring Return

Description Series 41 and Series 81 Modutrol IV motors are 2-position (line- and low-voltage per motor control) spring-return motors. They are used to operate dampers or valves in applications where it is necessary or desirable to have the controlled element return to the starting position in the event of power failure or interruption. Features Fixed torque throughout the entire voltage range. Integral spring return returns motor to normal position when power is interrupted. Integral junction box provides NEMA 3 weather

Read More »

Honeywell M7294Q1015 Modutrol IV Motor, Non-Spring Return

Description The Series 72 Modutrol IV Motors spring return and non-spring return motors are used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve at any point between open and closed. Product FeaturesIntegral spring return returns motor to normal position when power is interrupted. Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position. Motor and circuitry operate from 24

Read More »

Honeywell M7286G1009 Modutrol IV Motor, Non-Spring Return

Description The Series 72 Modutrol IV Motors spring return and non-spring return motors are used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve at any point between open and closed. Features Integral spring return returns motor to normal position when power is interrupted. Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position. Motor and circuitry operate from 24

Read More »

Honeywell M7285Q1032 Modutrol IV Motor, Non-Spring Return

M7285Q1032 has been discontinued Discontinued June 8, 2022 This product was discontinued by the manufacturer. Direct Replacement: M9185D1004    Description The Series 72 Modutrol IV Motors spring return and non-spring return motors are used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve at any point between open and closed. Features Integral spring return returns motor to normal position when power is interrupted. Integral junction box

Read More »

Honeywell M7285Q1024/U Modutrol IV Motor, Non-Spring Return

Description The Series 72 Modutrol IV Motors spring return and non-spring return motors are used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve at any point between open and closed. Features Integral spring return returns motor to normal position when power is interrupted. Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position. Motor and circuitry operate from 24

Read More »

Honeywell M7285A1045 Modutrol IV Motor, Non-Spring Return

M7285A1045 has been discontinued Discontinued October 27, 2023 This product was discontinued by the manufacturer. Direct Replacement: M9185D1004 Description The Series 72 Modutrol IV Motors spring return and non-spring return motors are used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve at any point between open and closed. Features Integral spring return returns motor to normal position when power is interrupted. Integral junction box provides

Read More »

Honeywell M7284Q1106 Modutrol IV Motor, Non-Spring Return

M7284Q1106 has been discontinued Discontinued December 25, 2023 This product was discontinued by the manufacturer. Direct Replacement: M7284Q1009 Description The Series 72 Modutrol IV Motors spring return and non-spring return motors are used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve at any point between open and closed. Features Integral spring return returns motor to normal position when power is interrupted. Integral junction box provides

Read More »

Honeywell M7284Q1098 Modutrol IV Motor, Non-Spring Return

Description The Series 72 Modutrol IV Motors spring return and non-spring return motors are used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve at any point between open and closed. Features Integral spring return returns motor to normal position when power is interrupted. Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position. Motor and circuitry operate from 24

Read More »

Honeywell M7284Q1082 Modutrol IV Motor, Non-Spring Return

Description The Series 72 Modutrol IV Motors spring return and non-spring return motors are used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve at any point between open and closed. Features Integral spring return returns motor to normal position when power is interrupted. Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position. Motor and circuitry operate from 24

Read More »

Honeywell M7284Q1009 Modutrol IV Motor, Non-Spring Return

Description The Series 72 Modutrol IV Motors spring return and non-spring return motors are used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve at any point between open and closed. Features Integral spring return returns motor to normal position when power is interrupted. Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position. Motor and circuitry operate from 24

Read More »

Get A Quote

Fill in the form below, or call us now at 1-800-755-2883

Full Product Catalog

See our comprehensive product catalog!