Description The Honeywell M436A1116 Modutrol IV Motor is a spring return actuator designed for two-position control in applications such as back draft, outdoor air changeover, zone, or minimum position damper control. This robust actuator operates with a two-wire, line voltage SPST input signal, ensuring reliable and straightforward integration into control systems. With a power supply of 120 Volts AC, the M436A1116 provides precise control with a 30-second timing and a 75-degree stroke. The actuator is mechanically set to a normally

Description The Honeywell Modutrol IV Motor M9164D1009 is a non-spring return, modulating proportional control motor from the Series 90 line. This motor is designed to operate dampers or valves in HVAC systems, using a 135 Ohm input signal provided by compatible controllers. It operates on a 24 Volts AC power supply, featuring a timing range of 30-60 seconds and a stroke range of 90-160 degrees. The actuator’s normal position is normally closed (electric), and it supports field-addable auxiliary switches for

Description These Series 62 Modutrol IV Motors non-spring return floating control motors are used with controllers that provide a switched spdt or floating output to operate dampers or valves. These motors also have an internal electrically isolated feedback potentiometer that provides indication of the motor shaft position some models can be used for slaving Series 90 Motors. Features Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position. Motor and circuitry operate from 24

Description The Honeywell Modutrol IV Motor M7284C1000 is designed for precise control of dampers and valves in HVAC systems. This actuator operates on a 120V power supply and can position a damper or valve at any point between open and closed based on a 4-20 mA input signal from an electronic controller. With a timing of 30 seconds and a 90-degree stroke, it ensures smooth and accurate modulation. The M7284C1000 features proportional reversing action and a normally closed electric position,

Description The Honeywell Modutrol IV Motor M9494D1000 is a spring-return motor designed for reliable operation of dampers or valves in HVAC applications. Suitable for both line- and low-voltage control, this motor ensures that the controlled element returns to its starting position during power failures or interruptions. The M9494D1000 operates as a proportional reversing actuator with a 135 Ohm input signal and is powered by a 24 Volt AC supply. It features adjustable timing from 60 to 120 seconds and a