Description
The Honeywell R7795A1001 is a flame safeguard primary control unit designed for providing reliable flame failure protection and automatic control of commercial and industrial gas and oil burners. It features a solid-state design, offering enhanced durability and reliability in harsh environments. This model supports both intermittent pilot and interrupted pilot systems, providing flexibility for various applications. It incorporates an ultraviolet (UV) amplifier for flame detection, ensuring quick and accurate flame sensing.
The R7795A1001 operates at 120 Vac and consumes a maximum of 17 VA. It includes a field-selectable trial for pilot flame ignition, allowing either a ten-second or a four-second trial period, enhancing the system’s adaptability. The unit is equipped with a safe-start feature to prevent startup if a flame or flame-simulating failure is detected, ensuring safety and compliance with Underwriters Laboratories and Factory Mutual standards.
Additionally, the R7795A1001 features a powered alarm terminal that can operate an external line voltage alarm in the event of a safety lockout. It mounts on a Q795A Subbase with two captive screws, simplifying installation and ensuring secure connections. The system also includes terminals for connecting a line voltage airflow switch to verify airflow throughout the prepurge and run periods, further enhancing operational safety and reliability.
Features
- Include flame signal amplifiers that are color-coded: purple for ultraviolet and green for rectification.
- Require a plug-in prepurge timer of 1.5, 7, 10, 30, 60, or 90 seconds.
- Mount on a Q795A Wiring subbase with two captive screws.
- Include line voltage airflow switch to prove airflow from the start of prepurge through the run period.
- Prevent start-up with lockout if flame or a flame simulating failure exists.
- Full Function Primary Safety Control, Intermittent Pilot, Ultraviolet
- Application: Provides Flameout Protection plus Automatic control of Commercial and Industrial Gas and Oil Burners
- Flame Failure Response Time: 3 seconds nominal
- Purging Time: Determined by Plug-in Purge Timer
- Safety Switch Timing: Electronic – 10 seconds, Mechanical – 15 seconds
- Electrical Connections: Terminals in Q795 Wiring Subbase
- Alarm Relay Switching: 120Vac Output for Alarm
- Required Components: ST795 Prepurge Timer and Q795 Wiring Subbase
Specs
Voltage: |
120v |
---|---|
Frequency: |
60 Hz 50 Hz |
Max Temp (F): |
135°F |
Temperature Range (F): |
-40°F to 135°F |
Min Temp (F): |
-40°F |
Height: |
5″ |
Width: |
5″ |
Depth (Inches): |
5-1/4″ |
Fuel Type: |
Oil |
Request a Quote now or call us at 1-800-755-2883 for expert assistance.