Description
Reversing, proportional motors used to drive burner firing rate valves, dampers or auxiliary equipment. Replace M941A,C,D motors.
Modutrol IV Proportional Reversing Actuator, 135 Ohm Input Signal
Power Supply: 24 Volts AC, Timing: 15-30 Seconds, Stroke: 90-160 Degrees
Normal Position: Normally Closed (Electric), 1 Auxiliary Switch, Torque: 75 Lb-In
Resistor kit, resistor board, or interface module can be used to drive Series 90 motor(s) with controllers that provide current or voltage electronic signals.Replaces Obsolete Model: M9484D1002, M9484D1036, M9484E1116Features
Modutrol IV Proportional Reversing Actuator, 135 Ohm Input Signal
Power Supply: 24 Volts AC, Timing: 15-30 Seconds, Stroke: 90-160 Degrees
Normal Position: Normally Closed (Electric), 1 Auxiliary Switch, Torque: 75 Lb-In
Resistor kit, resistor board, or interface module can be used to drive Series 90 motor(s) with controllers that provide current or voltage electronic signals.Replaces Obsolete Model: M9484D1002, M9484D1036, M9484E1116Features
- Designed for flame safeguard applications in commercial/industrial oil or gas burner system.
- Vibration resistant electronic drive circuit.
- Regulated by three-wire proportional controller.
- Stroke is field-adjustable to 90 or 160 degrees.
Specs
| Torque: |
75 lb-in |
|---|---|
| Voltage: |
24v |
| Temperature Range: |
-40° to 150°F |
| Power Consumption: |
15W |
Request a Quote now or call us at 1-800-755-2883 for expert assistance