Honeywell Modutrol IV Motor M9185D1004

Description

The Honeywell Modutrol IV Motor M9185D1004 is a Series 90 spring return, modulating proportional control motor designed for use with controllers providing a Series 90 output to operate dampers or valves. It accepts a 135 Ohm input signal and operates at 24 Volts AC. With a timing range of 30-60 seconds and an adjustable stroke of 90-160 degrees, it provides reliable and precise control. The motor features a normal position that is mechanically and electrically closed, and it supports field-addable auxiliary switches. The torque is rated at 60 lb-in. This model replaces obsolete models M7285A1052 and M9175D1014.

Features

  • Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position.
  • Motor and circuitry operate from 24 Vac.
  • Quick-connect terminals are standard–screw terminal adapter is available.
  • Adapter bracket for matching shaft height of older motors is available.
  • Motors have field adjustable stroke (90 to 160 degrees).
  • Integral auxiliary switches are available factory mounted, or can be field added.
  • All models have dual shafts (slotted and tapped on both ends).
  • All models have auxiliary switch cams.
  • Fixed torque throughout the entire voltage range.

Specifications

  • Application Type: Electric
  • Fail Safe Mode: Spring Return
  • Control Signal: Proportional, 135 ohm
  • Feedback: no
  • Motor Shaft: Dual ended Shaft
  • Stroke: Adjustable; 90 to 160 degrees, Symmetrical
  • Torque Rating (lb-in.): 150 lb-in
  • External Auxiliary Switches Available: Yes
  • Frequency: 50 Hz, 60 Hz
  • Power Consumption Driving (VA): 20 VA
  • Electrical Connections: Quick Connect Terminals
  • Shaft Dimensions (in.): .375 in
  • Shaft Shape: Square
  • Mounting: foot-mounted
  • Dimensions: 6 7/16 in. high x 5 1/2 in. wide x 8 3/4 in. deep
  • Temperature Range: -40 to 150F
  • Deadweight Load on Shaft (Either End) (lb): 200 lbs
  • Deadweight Load on Shaft (Combined on both shafts) (lb): 300 lbs
  • Nominal Timing (sec): 30-60 sec
  • Shaft Rotation (upon control signal increase): Clockwise (as viewed from power end) (normally closed)
  • Auxiliary Switch Ratings AFL – 120 Vac: 7.2A
  • Auxiliary Switch Ratings AFL – 240 Vac: 3.6A
  • Auxiliary Switch Ratings ALR- 120 Vac: 43.2A
  • Auxiliary Switch Ratings ALR- 240 Vac: 21.6A

Specs

Fail Safe Mode:

Spring Return

Torque:

60 lb-in

Control Signal:

Proportional

Voltage:

24v

Internal Aux Switch:

0

Mount:

Foot

Temperature Range:

-40° to 150°F

Timing:

30-60 Seconds

 

Request a Quote now or call us at 1-800-755-2883 for expert assistance.

Get A Quote

Fill in the form below, or call us now at 1-800-755-2883

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

Full Product Catalog

See our comprehensive product catalog!