Honeywell Modutrol IV Motor M9164D1009

The Honeywell Modutrol IV Motor M9164D1009 is a non-spring return, modulating proportional control motor from the Series 90 line. This motor is designed to operate dampers or valves in HVAC systems, using a 135 Ohm input signal provided by compatible controllers. It operates on a 24 Volts AC power supply, featuring a timing range of 30-60 seconds and a stroke range of 90-160 degrees.

The actuator’s normal position is normally closed (electric), and it supports field-addable auxiliary switches for enhanced functionality. With a torque of 35 Lb-In, it ensures reliable performance in various control applications. Additionally, the motor can be driven by controllers that deliver current or voltage electronic signals through a resistor kit, resistor board, or interface module.

The M9164D1009 replaces obsolete models such as M9164A1120, M9164A1047, M9164A1062, and M9164A1096, offering an upgraded solution for modern HVAC control needs. Its robust design and precise control capabilities make it a dependable choice for maintaining optimal system performance.

Features

• Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position.
• Motor and circuitry operate from 24 Vac.
• Quick-connect terminals are standard–screw terminal adapter is available.
• Adapter bracket for matching shaft height of older motors is available.
• Motors have field adjustable stroke (90 to 160 degrees).
• Integral auxiliary switches are available factory mounted, or can be field added.
• All models have dual shafts (slotted and tapped on both ends).
• All models have auxiliary switch cams.
• Fixed torque throughout the entire voltage range.

Specifications

• Application Type: Electric
• Fail Safe Mode: Non-Spring Return
• Control Signal: Proportional, 135 ohm
• Feedback: no
• Motor Shaft: Dual ended Shaft
• Stroke: Adjustable; 90 to 160 degrees, Asymmetrical
• Torque Rating (lb-in.): 60 lb-in
• External Auxiliary Switches Available: Yes
• Frequency: 50 Hz, 60 Hz
• Power Consumption Driving (VA): 20 VA
• Electrical Connections: Quick Connect Terminals
• Shaft Dimensions (in.): .375 in
• Shaft Shape: Square
• Mounting: foot-mounted
• Dimensions: 6 7/16 in. high x 5 1/2 in. wide x 8 3/4 in. deep
• Temperature Range: -40 to 150F
• Deadweight Load on Shaft (Either End) (lb): 200 lbs
• Deadweight Load on Shaft (Combined on both shafts) (lb): 300 lbs
• Nominal Timing (sec): 30 -60 sec
• Shaft Rotation (upon control signal increase): Counter-clockwise (as viewed from power end) (normally open)
• Auxiliary Switch Ratings AFL – 120 Vac: 7.2A
• Auxiliary Switch Ratings AFL – 240 Vac: 3.6A
• Auxiliary Switch Ratings ALR- 120 Vac: 43.2A
• Auxiliary Switch Ratings ALR- 240 Vac: 21.6A