Honeywell M7284C1000 Mod MotorIf you need expert assistance for the Honeywell M7284C1000 or are looking to purchase these modutrol motors, you have come to the right place. We have more than 30 years of experience  in the industry and can offer you a BRAND NEW item or to REPAIR your Honeywell M7284C1000. With either option, we will save you money!

Request a Quote now or call us at 1-800-755-2883 for expert assistance. Worldwide Shipping is available!

Honeywell M7284C1000 Overview

Series 72 Modutrol IV Motors are spring & non-spring return motors used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller, positioning a damper or valve at any point between open & closed.

Features

  • Integral spring return returns motor to normal position in the event of power failure on spring return models.
  • Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position.
  • Motor and circuitry operate from 24 Vac.
  • Quick-connect terminals are standard–screw terminal adapter is available.
  • Adapter bracket for matching shaft height of older motors is available.
  • Motors have field adjustable stroke (90 to 160 degrees).
  • Integral auxiliary switches are available factory mounted, or can be field added.
  • Spring return motors can operate valve linkages from power end or auxiliary end shafts for normally closed or normally open valve applications.
  • All models have dual shafts (slotted and tapped on both ends).
  • All models have auxiliary switch cams.
  • Fixed torque throughout the entire voltage range.
  • Motors are designed for either normally open or normally closed valves and dampers.
  • Models available with adjustable start (zero) and span.
  • Models available with 4 to 20 mA input signal.
  • Models available with 2 to 10 Vdc input signal.
  • Die-cast aluminum housing.

 

 Honeywell M7284C1000 Specifications

 

Application Electric
Dimensions (in.) 6 7/16 in. high x 5 1/2 in. wide x 7 5/16 in. deep
Dimensions (mm) 164 mm high x 140 mm wide x 185 mm deep
Includes Transformer and Screw Terminal Adapter
Weight (lb) 7.5 lb
Mounting Foot-mounted
Frequency 50 Hz; 60 Hz
Approvals, Underwriters Laboratories Inc. Listed: File No. E4436, Guide No. XAPX for USA and Canada
Electrical Connections Screw terminals
Supply Voltage 120V
Power Consumption Driving– 15 VA
Approvals, CE EN55011 (Emission) EN50082-2 (Immunity) 73/23/EEC (LVD)
Ambient Temperature Range (F) -40 F to +150 F
Ambient Temperature Range (C) -40 C to +60 C
Internal Auxiliary Switch 2
Auxiliary Switch Ratings AFL – 120 Vac– 7.2A; ALR- 120 Vac– 43.2A; AFL – 240 Vac– 3.6A; ALR- 240 Vac– 21.6A
Stroke Adjustable; 90 to 160 degrees, Symmetrical
Shaft Dimensions (in.) 0.375 in. Square
Control Signal Modulating, 4-20 mA
Fail Safe Mode Non-Spring Return
Torque Rating (lb-in.) 150 lb-in.
Torque Rating (Nm) 17 Nm
External Auxiliary Switches Available Yes
Shaft Rotation (upon control signal increase) Clockwise (as viewed from power end) (normally closed)
Factory Stroke Setting 90 degrees
Timing, Nominal 30-60 sec
Feedback No
Shaft Dimensions (mm) 10 mm Square
Motor shafts Dual-ended shaft
Deadweight Load on Shaft Either End– 200 lbs.; Combined on both Shafts– 300 lbs.
Internal Transformer 50004263-002

Get A Quote

Fill in the form below, or call us now at 1-800-755-2883

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

Full Product Catalog

See our comprehensive product catalog!