Honeywell M7284A1012 Modutrol IV Motor, Non-Spring Return

The Series 72 Modutrol IV Motors, available in both spring return and non-spring return models, are designed to control dampers and valves. These motors accept a current or voltage signal from an electronic controller, allowing precise positioning of a damper or valve at any point between fully open and fully closed.

Features
Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position.
Motor and circuitry operate from 24 Vac.
Quick-connect terminals are standard–screw terminal adapter is available.
Adapter bracket for matching shaft height of older motors is available.
Motors have field adjustable stroke (90 to 160 degrees).
Integral auxiliary switches are available factory mounted, or can be field added.
All models have dual shafts (slotted and tapped on both ends).
All models have auxiliary switch cams.
Fixed torque throughout the entire voltage range.

Specifications
Application Type: Electric
Fail Safe Mode: Non-Spring Return
Control Signal: Modulating, 10.5-13.5 Vdc
Motor Shaft: Dual ended Shaft
Stroke: Adjustable; 90 to 160 degrees, Asymmetrical
External Auxiliary Switches Available: Yes
Frequency: 50 Hz, 60 Hz
Power Consumption Driving (VA): 10 VA
Shaft Dimensions (in.): .375 in
Shaft Shape: Square
Mounting: foot-mounted
Dimensions: 6 7/16 in. high x 5 1/2 in. wide x 8 3/4 in. deep
Temperature Range: -40 to 150F
Deadweight Load on Shaft (Either End) (lb): 200 lbs
Deadweight Load on Shaft (Combined on both shafts) (lb): 300 lbs
Auxiliary Switch Ratings AFL – 120 Vac: 7.2A
Auxiliary Switch Ratings AFL – 240 Vac: 3.6A
Auxiliary Switch Ratings ALR- 120 Vac: 43.2A
Auxiliary Switch Ratings ALR- 240 Vac: 21.6A