Allen Bradley

The 1756-CJC ControlLogix Thermocouple Sensor Kit by Allen-Bradley is a Cold Junction Compensation Thermistor with 2 jumpers and it is used with the 1756-IRT8I or the 1756-IT16 module. The cold compensation thermistor is a temperature-dependent resistor used when temperature correction is required in Thermocouple Analog input modules. The Allen-Bradley 1756-CJC is a ControlLogix Cold Junction Compensation Kit. The 1756-CJC provides the user with sensors that are compatible with the 1756-IRT88I and the 1756-IT16 Analog Modules. This 1756-CJC accessory is primarily

The 1756-CFM ControlLogix Configurable Flowmeter by Allen-Bradley is a module located on the ControlLogix Chassis, with a single-slot for interfacing between the LogixController and the external I/O devices. It has 4 inputs (2 flow-meter, and 2 gate inputs) with an IEC-certified current rating between 6 and 30mA at 24V DC and at a maximum input frequency of 100 KHz. It has a flow-meter input voltage ranging between +/- 30V DC with a selectable input threshold of 50mV, 1.3V, and 4V

The 1756-BATM ControlLogix Battery module by Allen-Bradley is a battery module compatible with the Allen-Bradley 1756-L55Mxx, 1756-L61, 1756-L62, and the 1756-L63 controllers. It is a battery assembly module that consists of a single 1756-BATA (10g lithium) battery arrangement with a 3.28-feet cable for connecting the entire module to the controller. During installation, the 1756-BATM is either mounted directly to the panel of the controller or mounted on a DIN Rail. The 1756-BATM module has an overall input rating of 15mA

Designed by Allen-Bradley, the 1756-BATA battery is a ControlLogix replacement lithium battery. The battery features 2 lithium cells and each of the 2 comes with approximately 5 grams of lithium. The 1756-BATA battery contains about 10 grams of lithium in total. The 1756-BATA battery is a backup battery that is used for the battery module of the Allen-Bradley ControlLogix devices. The current rating of the 1756-BATA battery is a maximum of 19,000 mA while the rated voltage is 3.6 Volts

The 1756-BA2 ControlLogix Lithium Metal Battery Assembly by Allen-Bradley is a battery assembly for the Allen-Bradley 1756-L6x Controller Series B which is used to back up the controller’s stored information in the non-volatile memory and it keeps the controller’s internal clock working when the controller is powered down. The battery assembly consists of a Duracell Lithium Battery Cell which is installed on the chassis and the battery functions and lifespan depend on the environmental conditions around the chassis and the

The Allen-Bradley 1756-AMXN module allows an Allen-Bradley ControlLogix backplane to communicate with the Automax Remote I/O network or with the AutoMax DCS network. The 1756-AMXN ControlLogix module can act as a Remote I/O master module, a DCS slave module, or as a DCS master module. When configured as a DCS master module, the 1756-AMXN module scans a maximum of 55 slave units, and it can transmit 8 words of broadcast data. It also supports a maximum of 8 scheduled connections with the

The Allen-Bradley 1756-A7XT is a ControlLogix-XT chassis with 7 slots and a part of the Bulletin 1756 ControlLogix Chassis series. Any module can be fitted into any of the seven slots that come with slot guides and a snap-on retention feature for easy and secure fitting. It has been constructed only for horizontal back-panel mounting. It features direct mounting accommodation for any Bulletin 1756 power supply module. It is an essential component in building the modular ControlLogix system. The 1756-A7XT

The 1756-A7LXT conformally-coated Allen-Bradley ControlLogix-XT chassis has 7 slots in it and it is specifically designed for maximum durability in hazardous environments such as the ISA G3 rated hazardous environments. The maximum heat dissipated by the chassis is 4.1 Watts. The “per slot” backplane current levels are 1.5 Amps at 1.2 Volts DC, 4 Amps at 3.3 Volts DC, 10 Amps or 6 Amps at 5.1 Volts DC, and 2 Amps at 24 Volts DC. The isolation voltage is determined by the installed

The Allen-Bradley 1756-A7K should be installed in an appropriate enclosure that is designed for certain environmental conditions. The 1756-A7K is designed on the horizontal rear panel assembly. The mounting tabs required of this chassis are 2 tops and 2bottomsm. The relative humidity of this chassis is from 5-95% without condensation. The operating vibration of this chassis is 2 g at 10-500 Hz. The operating shock of this chassis is 30 g. The nonoperating shock of this chassis is 30 g.

The Allen Bradley 1756-A7 is a Seven (7) slot chassis from the ControlLogix Programmable Automation Controller (PAC) platform. This hardware is an essential component in building a ControlLogix control system as chassis, such as the 1756-A7 provides backplane connection and allows module to be installed in the provided module insertion slots. The 1756-A7 also hosts the mounting slot for the Power supply, located at the left most side of the chassis. This chassis supports slim, standard and power supplies. The