The Allen Bradley 1756-IB16 is ControlLogix I/O module. This 16-point DC input module, with 8 points per group, can be connected to a 1756 ControlLogix chassis. The compatible removable terminal block housings, or RTB, are the 1756-TBNH 20 positions NEMA RTB and the 1756-TBSH 20 position spring clamp RTB. Note that before installation, users should have the compatible RTB on hand and that the 1756 chassis and power supply should be installed and grounded. The nominal input voltage of the

The Allen Bradley 1756-IA8D is a ControlLogix Digital I/O module. 8 diagnostic inputs, with 4 points available per group, are in this AC input module. This module is suitable for a 1756 ControlLogix chassis and is only compatible with the 1756-TNBH or 1756-TBSH removable terminal block, or RTB. A unique feature of the 1756-IA8D is the Field Power Loss detection. When field power loss occurs to the module or zero cross cannot be detected, a point level fault is then

The Allen Bradley 1756-IA32 is a ControlLogix Digital I/O Module. This AC input module has a display where users can check its input and communication status, as well as the module health. This particular module has 32 inputs available, with 16 points available in each group. The removable terminal block housings or RTB, compatible with the 1756-IA32 are 1756-TBCH and 1756-TBS6H. The continuous isolation voltage of this module is 250 V. Its voltage category is 120 V AC and 50/60

The Allen Bradley 1756-IA16K is a Sixteen (16) channel AC input module from the ControlLogix Programmable Automation Controller (PAC) platform. This module is used to interface discrete signaling devices such as switches, auxiliary contacts and similarly operating devices that are rated for 120VAC, nominal and voltage range of 74-132VAC with frequency of 47-63 Hz. It has Sixteen (16) input channels, grouped into Two (2) groups of Eight (8) points per group. The 1756-IA16K module’s operating voltage range is from 74

The 1756-IA16IK input module is a ControlLogix 120 Volts AC rated isolated input module that is designed and manufactured by Allen Bradley. This module is one of the most efficient modules because it takes up very little space on 1 digital input. Further advantages of this module with 16 isolated digital inputs are its ability to be replaced without disturbing the wiring to the sensors around it, as well as the ability to work in environments with high humidity and

The Allen Bradley 1756-IA16 is a Sixteen (16) channel AC input module from the ControlLogix Programmable Automation Controller (PAC) platform. This module is used to interface discrete signaling devices such as switches, auxiliary contacts and similarly operating devices that are rated for 120VAC, nominal and voltage range of 74-132VAC with frequency of 47-63 Hz. It has Sixteen (16) input channels, grouped into Two (2) groups of Eight (8) points per group. The 1756-IA16 module’s operating voltage range is from 74

The Allen Bradley 1756-HYD02 is a module that connects to a 1756 ControlLogix controller and is normally used for the accurate control and positioning of a hydraulic cylinder. It can be wired to a linear displacement transducer, or LDT, for feedback and a proportional or servo valve for control of the hydraulic axis, with one module able to control up to two axes. The LDT will give an analog command reference for the valve. This is to make sure that

The Allen Bradley 1756-HSC is a counter module that is used to perform high-speed counting for industrial applications. This module has selectable modes such as the frequency mode, or the counter mode for processing input signals. The counter mode is set as the default mode which can update data every 2 milliseconds. Users can change the storage of the count values because the 1756-HSC module uses the user-configured presets to evaluate it against the count values. This gives the module

The 1756-HIST2G is an Allen Bradley manufactured ControlLogix device. It is part of the Factory Talk Historian ME communication module. It is widely used in an industry-based device for distributing the implementation of motion and gives flexible control to the user. It is equipped with a non-removable Lithium battery and comes with a Precision Real-Time Clock. The ControlLogix has a power consumption of 5 Watts under normal load and a maximum of 7 Watts. The module has no fan present.

This HME module has 512 KB of SRAM that is battery-backed and a 128K L1 / 128K L2 Cache. In addition, this 1756-HIST1G module has CompactFlash Type II with DMA Flash Memory and One Ethernet 10/100T IEEE 802.3 type of port. The 1756-HIST1G uses an irremovable rechargeable lithium form of battery. The 1756-HIST1G has Fanless operation and consumes a maximum of 7 Watts (5 Watts typical) of electrical power. Thus, it has a supply voltage and current ratings of 5.1V