The Allen-Bradley 1769-IF16C is a Compact I/O module that is compatible for use with MicroLogix 1500 Programmable Logic Controller (PLC) and CompactLogix Programmable Automation Controllers (PAC). The 1769-IF16C features Sixteen (16) single-ended input channels that are designed to interface field instruments that provides 0-20 mA or 4-20 mA analog Current signal towards the module’s input channels. The 1769-IF16C can be used for interfacing of field instruments such as Transmitters, controllers; Accept feedback signals of Variable Frequency Drives (VFD), modulating valves,

The Allen-Bradley 1769-IA8I is a programmable logic controller module that runs on 120V AC. It is a digital CompactLogix module that is ideal for small and mid-size applications that require safety parameters, motion control, and complex communication. The module provides an integrated serial port and offers a memory ranging from 2-3 MB. The 1769-IA8I has display LEDs and an open-style enclosure that measures 87 mm in depth, 118 mm in height, and 35 mm in width. It weighs approximately 270

The Allen-Bradley 1769-IA16 is a CompactLogix module, each channel operating at 120 Volt AC. It has Sixteen (16) points functioning as digital input module. The channels present in this module form a single group and have internally-connected commons. The 1769-IA16 has a voltage category of 100 to 120 Volts AC and an operating voltage range of 79 to 132 Volts AC, with a line frequency of 47 to 63 Hertz. When in an off-state, this module has a maximum current

The Allen-Bradley 1769-ECR is a Right End Cap (ECR) module that is used with the CompactLogix controller series. This module functions as a bus terminator, terminating the FlexBus circuitry, signaling the end of the CompactLogix assembly. This module is necessary to qualify the CompactLogix configuration. The 1769-ECR features a current draw of 5 mA at 5.1 VDC. It has an operating altitude of 2000 m or 6562 ft and approximately weighs 130 grams or 0.286 lb. It has an open

The Allen-Bradley 1769-ECL is a left-end cap or terminator that is a part of a 1769 controller. The 1769-ECL terminates the end of the controller’s communication bus. It is for Micrologix 1500 or Compactlogix devices. Its greatest bus current draw is 5 mA at 5V DC. It comes with a 6562 feet operating altitude and has a North American temperature code of T3C but no IEC temperature code. It has an approximate shipping weight of 0.286 lbs and an open-type enclosure rating to ensure safety which

The 1769-CRR3 is a programmable logic controller that is manufactured by Allen-Bradley and which belongs to the compact block I/O series. This device is a module AB which comes with an output on-state voltage range of 10 to 30 Volts DC and a maximum output on-state current of 0.5 mA. This series is a one-of-a-kind series since it comes with 16 outputs and 0 inputs, whereby all the outputs are available in groups of 4 or 8. For the reason

The Allen-Bradley 1769-CRR1 is an expansion cable that connects an I/O bank to another I/O bank and comes with terminating caps. To be specific, this expansion cable allows users to connect the right I/O bank to another right I/O bank. The entire 1769-CRR1 expansion cable measures approximately 305 mm or 1 foot from end to end and the terminating caps have dimensions of 0.71 x 4.65 inches or 18 x 118 mm. Note that this expansion cable can be used

The Allen-Bradley 1769-CRL3 is a compact I/O cable for the DriveLogix 5730 Controller. The 1769-CRL3 is not a module or a power supply, but rather a cable to connect banks or group of modules. It is a right bank-to-left bank expansion cable type that makes extensions for the bus communication lines. The 1769 system can only use 2 cables at most, allowing for 3 banks of I/O modules with their own power supply. The 1769-CRL3 measures 3.28 feet and is

The 1769-CRL1 right-to-left cable is a product from Allen-Bradley/Rockwell Automation that is manufactured as part of the CompactLogix and MicroLogix 1500 product series. This module type of expansion cable features a right-to-left connection, measures 1 foot or 305 millimeters in length and it has an isolation voltage of 30 Volts or 30 Volts continuous voltage. It also comes with a backplane current of 1.4 Amps at 24 Volts, a power consumption of 33.6 Watts, and a power dissipation of 7.5