The Allen Bradley 1756-PA50 is a ControlLogix Standard Power supply. This power supply is primarily used to provide power to a ControlLogix rack, whether local or distributed I/O rack. It is mounted on the leftmost side of the chassis with input voltage range of 85-265VAC and nominal rating of 120V/240VAC.

The 1756-PA50 is compatible with a variety of ControlLogix chassis such as 1756-A4, 1756-A7, 1756-A10, 1756-A13, and 1756-A17. Compatible chassis versions are Series A, B and C.

The 1756-PA50 has an input power requirement of 81 W/91VA @ 50 °C (122 °F) 68 W/77VA @ 60 °C (140 °F) and delivers maximum output power of 60 W @ 0 – 50 °C (+32…+122 °F) and 50 W @ 0-60 °C (+32…+140 °F) and capable of withstanding an inrush current rating of 20 A.

The 1756-PA50 has a Current capacity of 1.5A at 1.2V; 2A at 3.3V; 8 A @ 50 °C (122 °F) 6 A @ 60 °C (140 °F) at 5.1V and 2.5 A @ 50 °C (122 °F) 2.0 A @ 60 °C (140 °F) at 24V with isolation voltage rating of 250V (continuous), Reinforced Insulation Type, Power Input to Backplane Type tested @ 3150V DC for 60 s.

The 1756-PA50 is exclusively used as a system power supply. It cannot be used to supply voltage and power to electrical devices and distribute output via terminal blocks. When wiring input wires to this power supply module, appropriate wire size is 2.5 sq. mm. or 14 AWG solid or stranded copper wire with insulation rating of 90 °C (194 °F), or higher, with insulation thickness of 1.2 mm (3/64 in.).

It has an input frequency range of 47 – 63 Hz. It has maximum input power of 81W/91VA at 50 °C (122 °F), 68W/77VA at 60 °C (140 °F) and a maximum output power of 60W at 0 – 50 °C (32 – 122 °F) and of 50W at 0 – 60 °C (32 – 140 °F). It has a current capacity of 1.5A at 1.2V DC, 2A at 3.3V DC, 8A (50 °C) and 6A (60 °C) at 5.1V DC and 2.5A (50 °C) and 2.0A (60 °C) at 24V DC. It has dimensions of 5.51 x 3.07 x 5.71 in. and weighs 1.7 lbs. It has 250V (continuous) isolation voltage and maximum inrush current of 20A. It is installed on the left side slot of the 1756 ControlLogix chassis with an open type enclosure. It is compatible with the 1756-A4, 1756-A7, 1756-A10, 1756-A13 and the 1756-A17 chassis (Series A, B, and C) chassis. For wiring, 2.5 sq. mm. (14 AWG) solid or stranded copper wire rated at 90 °C (194 °F) or greater with maximum insulation of 1.2 mm (3/64 in.) is used. The 1756-PA50 power supply is intended for use in an industrial environment with 0 – 60 °C (32-140 °F) operating temperature, 30g operating shock and 5 – 95% noncondensing relative humidity.

Request a Quote now or call us at 1-800-755-2883 for expert assistance.

TCI Supply is not an authorized Allen Bradley Distributor

 

 

 

Manufacturer Rockwell Automation
Location 1756 Chassis Left Side
Dimensions 14.0 x 7.8 x 14.5 cm (5.51 x 3.07 x 5.71 in.)
Current Capacity 1.5A at 1.2V; 2A at 3.3V; 8 A @ 50 °C (122 °F) 6 A @ 60 °C (140 °F) at 5.1V and 2.5 A @ 50 °C (122 °F) 2.0 A @ 60 °C (140 °F) at 24V
Max Inrush Current 30 Amperes
Isolation Voltage 250 Volts Continuous
Input Voltage Range 85-265VAC
Nom Input Voltage 120/240VAC
Module Type Standard DC Power Supply
Series ControlLogix
Part Number/Catalog No. 1756-PA50
Weight 0.77 kg (1.7 lb)
Brand Allen Bradley
Hold Up time 30 ms @18…32V DC, 60 W 40 ms @18…32V DC, 50 W
Chassis Compatibility 1756-A4/A, 1756-A7/A, 1756-A10/A, 1756-A13/A, 1756-A17/A, 1756-A4/B, 1756-A7/B, 1756-A10/B, 1756-A13/B, 1756-A17/B, 1756-A4/C, 1756-A7/C, 1756-A10/C, 1756-A13/C, 1756-A17/C

Get A Quote

Fill in the form below, or call us now at 1-800-755-2883

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

Full Product Catalog

See our comprehensive product catalog!