The 1756-OX8I is an Allen Bradley product intended for use with the ControlLogix platform. This module is a Relay output module that consists of Eight (8) Normally Open (N.O) and Eight (8) Normally Closed (N.C) individually isolated contacts.

As this is a contact output module, each contact may be individually wired with an AC Voltage with range of 10 – 240 VAC or DC Voltage range of 5 to 125VDC. This enables the module to energize output devices operating at different voltage categories. Output devices such as contactors, motor starters, variable frequency drives, pilot lamps, annunciator panels, sounding devices, motors and equipment are some of the loads that may be connected to this module.

The output channels of this module are individually isolated however, it may also be wired as a non-isolated relay output module. This is done by simply shorting the L1 connections of the Removable Terminal Block (RTB) with the use of 1756-JMPR or a 3rd party jumper conductor.

Compatible RTB for use with relay output module are 1756-TBCH and 1756-TBS6H. These modules are separately purchased. With the use of RTBs, Output termination is modularized, module installation, troubleshooting and replacement is simplified. RTB prevent re-wiring or output signal termination.

Each of the modules maximum initial contact resistance of 100 m? at 6V 1 A. Additionally, each contact output has an expected contact life of 300 kHz for resistive load and 100 kHz inductive for inductive load. It also has a switching frequency of 1 operation/3 s (0.3 Hz at rated load) and a mean bounce time of 1.2 ms.

 

Request a Quote now or call us at 1-800-755-2883 for expert assistance.

TCI Supply is not an authorized Allen Bradley Distributor

Specification Sheet .pdf

 

Manufacturer Rockwell Automation
Brand Allen Bradley
Part Number/Catalog No. 1756-OX8I
Series ControlLogix
Module Type Isolated Relay Output Module
Outputs 8-Point Individually Isolated
Output Current 2, 0.5, 0.25 Amps
Contact Output Form C contacts
Operating Voltage 10-265 Volts AC, 5-150 Volts DC
Initial Contact Resistance 100 m? @ 6V 1 A
Maximum Switching frequency 1 operation/3 s (0.3 Hz at rated load)
Mean Bounce Time 1.2 ms
Removeable Terminal Block(s) 1756-TBCH, 1756-TBS6H
Expected contact life 300 kHz resistive; 100 kHz inductive
Maximum Output Delay Time 13 milliseconds
Power Dissipation (Max) 3.1 Watts at 60 Celsius
Backplane Current at 5 Volts 100 mA
Isolation Voltage 250V (continuous), basic insulation type, outputs-to- backplane, and output-to-output
Enclosure None

Get A Quote

Fill in the form below, or call us now at 1-800-755-2883

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

Full Product Catalog

See our comprehensive product catalog!