The 1756-N2 is a slot filler module package from Allen Bradley. This package consists of Two (2) passive modules like casing without electronic circuitry. In more popular terms, this module is also called a dummy module, covering and protecting the exposed circuitries of a vacant slot of the 1756 ControlLogix system. The 1756-N2 is designed as a single slot width dummy module. It does not occupy a slot of the chassis instead; it merely covers the electronic circuitry. This module is ideally used in installation locations with a high level or count of dust particles or small contaminants that may stick to the backplane. It also provides an additional layer of protection against gasses, vapors, and other industrial contaminants. backplane slots are created for a variety of reasons. Primarily, due to strategic partitioning of the system to maintain proper I/O module distribution in the event of modification. Additionally, vacant backplane slots are also created as expansiaon provisions. Finally, vacant slots are also created to reserve slot configuration by module inhibition. With module inhibition, a slot can be configured with a specific assignment even if the actual module is not yet available or not to be installed for a specific time period. With module inhibition, hardware reconfiguration can be avoided, preventing the stoppage of a running system. In all the mentioned situations, the 1756-N2 is applicable. The 1756-N2 can be mounted and dismantled with or without power as it does not contain any electronic circuitry. The operating temperature of this module is 0…60 °C (32…140 °F) while storage temperature is -25…+60 °C (-13…+140 °F).

The Allen Bradley 1756-N2 is a ControlLogix Empty Slot Filler Card. It is a slot filler module designed to fill empty slots in a standard ControlLogix chassis. It is categorized as an accessory for the Allen Bradley ControlLogix controllers. The package includes 2 slot filler modules for every 1756-N2 part. The 1756-N2 is for unoccupied slots of a standard ControlLogix chassis and it is considered as a slot filler module.

 

Request a Quote now or call us at 1-800-755-2883 for expert assistance.

TCI Supply is not an authorized Allen Bradley Distributor

Specification Sheet .pdf

 

Manufacturer Rockwell Automation
Brand Allen Bradley
Part Number/Catalog No. 1756-N2
Series ControlLogix
Module Type Slot Filler Module
Function Slot Filler
No. of slots protected Single slot
Communications RS-232, RS-422, RS-485
Backplane Current (5Volts) 800 milliamps
Backplane Current (24Volts) 3 milliamps
Current draw None
Power Dissipation 4 Watts
Status LED indicators None
SERCOS Data Rate 4 or 8 Megabits-Second
Removable and insertion under power Yes
Current Draw (5.1 Volts) 1.2 amps
Operating Temperature 0…60 °C (32…140 °F)
Storage temperature -25…+60 °C (-13…+140 °F)
Power Dissipation 6.2 Watts
Relative Humidity 5-95%, non-condensing
Thermal Dissipation 21.2 BTU-hour
Isolation Voltage 50 Volts Continuous
Enclosure None

Get A Quote

Fill in the form below, or call us now at 1-800-755-2883

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

Full Product Catalog

See our comprehensive product catalog!