The Allen-Bradley 1756-A17K is an open-type chassis. This chassis should be installed in an appropriate enclosure designed for certain environmental conditions. The 1756-A17K is designed for the horizontal rear panel assembly.

If the chassis mounting tab is not lying flat before the screws are secured, use additional washers as shims so that the chassis is not folded by the screw tack. A warped chassis can damage the backplane and cause intermittent operation. The Allen-Bradley 1756-A17K contains a ground bus. The ground bus is a common connection for each chassis inside the enclosure and the cage itself. For more information on how to install the center bus on this equipment, see the Industrial Automation Filling and Control Guide, 1770-4.1.

The weight of the Allen-Bradley 1756-A17K is around 2.2 kg (4.8 lb). The minimum cabinet of this chassis is 76.2 x 91.4 x 20.3 cm (30 x 36 x 8 inch). The relative humidity of this chassis is from 5-95% without condensation. The operating vibration of this chassis is 2 g at 10-500 Hz. The operating shock of this chassis is 30 g. The nonoperating shock of this chassis is 30 g. The 1756-A13K has a maximum surrounding air temperature of 60 °C (140 °F). The operating temperature of this chassis is from -25-60 °C (-13-140 °F). The nonoperating temperature of this chassis is from -40-85 °C (-40-185 °F). This chassis has ESD immunity of 6 kV contact discharges and 8 kV air discharges.

 

Request a Quote now or call us at 1-800-755-2883 for expert assistance.

TCI Supply is not an authorized Allen Bradley Distributor

Technical Data .pdf

 

anufacturer Rockwell Automation
Brand Allen-Bradley
Part Number/Catalog No. 1756-A17
Series ControlLogix
Module Type Chassis
Slots 17
Power Dissipation (Max) 6 Watts
Mounting Horizontal
Dimensions 30 x 36 x 8 inches
Weight 4.8 pounds (2.2 kilograms)
Enclosure Open
Backplane Current (5 Volts DC) 10 amps
Backplane Current (24 Volts DC) 2.8 Amps
Coating Conformal Coat

 

 

Get A Quote

Fill in the form below, or call us now at 1-800-755-2883

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

Full Product Catalog

See our comprehensive product catalog!