PLCs

The Allen-Bradley 1756-A5XT 5-slot ControlLogix-XT chassis is the backbone of an industrial ControlLogix system. The 1756-A5XT 5-slot chassis is designed only for horizontal back-panel mounting, but any module can be placed into any slot for flexible mounting. The chassis backplane provides a high-speed communication path between the ControlLogix modules installed in the chassis. The 1756-A5XT chassis is conformally coated and it can be used in ISA G3 rated environments. The operating temperature range for the 1756-A5XT chassis is from -25

The Allen Bradley 1756-A4K 1756 ControlLogix chassis is open-type equipment. The weight of the 1756-A4K is around 0.75 kg (1.7 lb). The minimum cabinet of this chassis is 50.8 x 50.8 x 20.3 cm (20 x 20 x 8 inch). The relative humidity of this chassis is from 5-95% without condensation. The operating vibration of this chassis is 2 g at 10-500 Hz. The operating shock of this chassis is 30 g. The nonoperating shock of this chassis is 30

The Allen Bradley 1756-A4 is a ControlLogix Chassis. It is a 4-Slot ControlLogix Chassis with Power dissipation and 1.8 W power consumption. It has dimensions of 50.8 x 50.8 x 20.3 cm (20 x 20 x 8 in.).in and weighs 1.7 lbs. It is horizontally mounted inside the panel and it has an open enclosure. It has a maximum Backplane current of 1.5 A at 1.2 V DC, 4 A at 3.3 V DC, 15 A at 5.1 V DC,

The Allen Bradley 1756-A17 is a ControlLogix component. This is a 17-slot chassis that is used to mount ControlLogix modules including processors, I/O modules, specialty modules and encompass partner modules. The 1756-A17 provides module housing including the necessary backplane connection to allow internal module connection and distribution of bus power through the embedded electronic circuitry and provided mounting slots to the chassis. It has a power consumption of 1.5 A @ 1.2VDC; 4A/4A @ 3.3 VDC; 15 A/6 A @

The Allen-Bradley 1756-A13K has specifications similar to other ControlLogix chassis. This chassis is used in a Zone 2 Environment. The enclosure should be accessible only by means of an appliance. The 1756-A13K is open type equipment. It is intended for use in industrial environments. Remove power before removing this chassis. It is because when you remove or insert a module with the power applied, an electrical arc may occur. This electrical arc can cause personal injury. Electrical arcing also causes

The 1756-A13 is a ControlLogix chassis from Allen-Bradley. This chassis provides module housing, providing 13 module slots where ControlLogix controllers and I/O modules may be installed. Aside from providing the mounting slots, the chassis also host the electronic circuitry which make-up the backplane. The backplane distributes the current which is used by each of the module to energize individual circuitry to function properly. The 1756-A13 supports horizontal mounting only. It requires minimum cabinet size of 60.9 x 76.2 x 20.3

The Allen-Bradley 1756-A10XT is one version of the 1756 ControlLogix chassis. In general, the 1756-A10XT has same specifications as 1756-A10K. This chassis has a maximum surrounding air temperature of 60 °C (140 °F). The operating temperature of this chassis is from -25-60 °C (-13-140 °F). The nonoperating temperature of this chassis is from -40-85 °C (-40-185 °F). The relative humidity of this chassis is from 5-95% without condensation. The operating vibration of this chassis is 2 g at 10-500 Hz.

The Allen-Bradley 1756-A10K 1756 ControlLogix chassis is designed on the horizontal rear panel assembly. This chassis has a maximum surrounding air temperature of 60 °C (140 °F). The operating temperature of this chassis is from -25-60 °C (-13-140 °F). The weight of the 1756-A10K is around 1.45 kg (3.2 lb). The minimum cabinet of this chassis is 50.8 x 76.2 x 20.3 cm (20 x 30 x 8 inch). The Allen-Bradley 1756-A10K is intended for use in industrial environments. This

The Allen-Bradley 1756-A10 is a Then (10) slot ControlLogix chassis. This hardware hosts the electronic connectivity among the ControlLogix modules with maximum backplane current rating of 1.5 A @ 1.2VDC; 4A/4A @ 3.3 VDC; 15 A/6 A @ 15 A/6 A and 2.8 A/2.8 A @ 24VDC. This chassis supports panel mounting with installation clearances of 15.3 cm (6.0 in.) for Top and bottom clearance and 10.2 cm (4.0 in.) plus the width of the power supply for side clearance.

The 1756-2WS weigh scale module has been designed for the Allen-Bradley ControlLogix systems. It has been designed and manufactured by Hardy Process Solutions. The typical applications for the 1756-2WS weigh scale module include batching, blending, filling, dispensing, level by weight, and weight checking applications. The 1756-2WS module is a dual scale module and it takes up one slot in the ControlLogix chassis. The module reduces installation costs and enhances speed because external Ethernet switches and routers are not required. The module collects data