Description

This non-spring return direct-coupled damper actuator offers modulating and floating/2-position control for air dampers, air handlers, ventilation flaps, and louvers. It provides reliable control for air damper applications up to 10 sq. ft./44 lb.-in. (5 Nm) and 20 sq. ft./88 lb.-in. (10 Nm) with seal-less damper blades, depending on air friction.

Features

Control for air damper applications with up to 50 sq ft assuming 3.5 in-lb per sq ft of damper area, velocity independent.
Patented self-centering shaft adapter.
Access cover to facilitate connectivity.
Declutch for manual adjustment.
Mechanical end limits.
Field-installable auxiliary switches.
Rotation direction selectable by switch.
Mountable in any orientation (no IP54 if upside down). Mechanical position indicator.
CE approved. UL approved.

Specifications

Description: Direct Coupled, General Purpose, Non-Spring Return Actuator
Actuator Type: Damper, Valve
Application Type: HVAC
Fail Safe Mode: Non-Spring Return
Control Signal: (0)2-10 Vdc (4-20 mA w/500 ohm resistor)
Supply Voltage: 24 Vac +20%, -15%, 24 Vdc
Number of Internal Auxiliary Switch: 0
External Auxiliary Switches Available: Yes, SSW2-1M
Shaft Adapter Type: Self-centering clamping
Manual Operation: Declutch mechanism
Mounting: Direct Coupled
Frequency: 60 Hz, 50 Hz
Rotational Stroke: 95 +/- 3 degrees
Rotation To Open: By Switch
Dual Integral Adj. Stops (3 degree increments)
Rotational Stroke Adjustment: Dual Integral Adj. Stops (3 degree increments)
Compatible Damper Shafts: 3/8 to 1.06 in. round or 3/8 to 11/16 in. square
Power Consumption: 5 VA
Temperature Range: -5 F to +140 F
Environmental Rating: NEMA2

Specs

Product Type:

Actuator

Actuator Type:

Proportional

Voltage:

24v

Application:

HVAC

Torque:

175 lb-in

Fail Safe Mode:

Non-Spring Return

Temperature Range (F):

-5°F to 140°F

Internal Aux Switch:

2

 

Request a Quote now or call us at 1-800-755-2883 for expert assistance.

Specificationsheet.pdf

Get A Quote

Fill in the form below, or call us now at 1-800-755-2883

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

Full Product Catalog

See our comprehensive product catalog!