Honeywell V5047A1039 Valve

The Honeywell V5047A1039 Valve is designed for controlling high-pressure steam, liquids, air, or noncombustible gases in applications where positive final shutoff is not required. This 2-inch, two-way globe valve features a 50 Cv rating and female NPT connections, suitable for water, glycol, or steam. It requires a Q5001D valve linkage and Modutrol motor for operation, supporting two-position, floating, or proportioning control based on the motor and controller used. The valve boasts a high capacity with minimal pressure drop, a cast iron body with stainless steel trim, equal percentage flow characteristics, a V-port for throttling or on-off service, replaceable seat rings, and spring-loaded Teflon cone packing for reduced friction.

Features

• Q5001D Valve Linkage and Modutrol motor required for operation.
• Suitable for two-position, floating, or proportioning control, depending on the motor and controller used.
• Provide high capacity with minimum pressure drop.
• Pipe sizes include 1, 1-1/4, 1-1/2, and 2 inches.
• Straight-through construction and threaded end connections.
• Cast iron body with stainless steel trim.
• Plug provides equal percentage characteristic of flow.
• V-port for either throttling or on-off service.
• Replaceable seat rings screw into body.
• Spring-loaded Teflon cone packing for minimum friction.

Specifications

• Valve Type: Globe Valve
• Body Pattern: Two-way mixing
• Flow Characteristic: Equal Percentage
• Controlled Medium: Steam, Chilled or hot water with up to 50% Glycol
• Connection Type: Female NPT
• Max Safe Operating Pressure: 150 psi water, 100 psi steam
• Valve Action: Stem down to close
• ANSI/ASME Rating: 125
• Actuation: Must be purchased separately
• Stem Travel: 9/16 in
• Static Pressure Rating: ANSI 125
• Ambient Temperature Rating: 32 F to 337 F
• Leakage Rating: Seat: 0.05% of Cv
• Materials (Body): Cast Iron
• Materials (stem): Stainless Steel
• Bonnet Size: 1-3/8 in.
• comments: double seated