Description
BURNER CONTROL INFRARED FLAME AMPLIFIER 120VAC
- Flame signal strength ranges from 0.0 to 5.0 VDC, with test jacks to measure amplifier flame signal voltage
- Plug into RM7800 relay module through printed circuit board edge connector, keyed for proper orientation
- Color-coded labels identify flame detection type. Green=Rectification, Red=Infrared, Purple=Ultraviolet
- Dynamic Ampli-Check circuitry tests the flame amplifier during burner operation.
- Dynamic Self-Check circuitry tests electronic components in the flame detection system 10 to 12 times per minute.
- Note: R7849A flame detectors should be used only on burners that cycle on and off at least once every 24 hours. Appliances with burners that remain on for 24 hours or longer should use ultra
Request a Quote now or call us at 1-800-755-2883 for expert assistance.