Honeywell R7849A1015 Ultraviolet Flame Amplifier

The Honeywell Ultraviolet Flame Amplifier is a solid-state, plug-in unit designed to interface with 7800 Series relay modules and Minipeeper UV Flame Detectors, including models C7027, C7035, and C7044. This amplifier responds to inputs from these flame detectors, providing accurate and reliable indication of flame presence. With a flame failure response time of either 0.8 or 1 second, it ensures rapid detection and response, enhancing safety in combustion systems. Its plug-in design facilitates easy installation and replacement, streamlining maintenance processes. The amplifier’s robust solid-state construction offers long-term stability and performance, making it suitable for demanding industrial applications. When used with 7800 Series relay modules, it ensures precise flame monitoring and safeguarding, critical for maintaining operational safety and efficiency in burner control systems. This versatile amplifier is essential for achieving reliable flame detection and protection, providing confidence in the performance and safety of combustion applications.

Features:

• Flame failure response time of 0.8 or 3.0 seconds.
• Flame signal strength ranges from 0.0 to 5.0 Vdc.
• Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
• Flame signal test jacks to measure amplifier flame signal voltage.
• Color-coded labels identify flame detection type. Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame detection system 7800 SERIES relay module locks out on safety shutdown with flame detection system failure.
• Compatible with existing Honeywell flame detectors (order separately).
• Type: Ultraviolet
• Flame Failure Response Time (sec): 0.8 sec or 1.0
• Self Checking: None (standard)
• Use With Primary Safety Control: 7800 SERIES Relay Modules
• Use With Flame Sensor: Gas, Oil: Minipeeper C7027A, C7035A, C7044