Description

This non-spring return direct-coupled damper actuator offers modulating and floating/2-position control for air dampers, air handlers, ventilation flaps, and louvers. It provides reliable control for air damper applications up to 10 sq. ft./44 lb-in (5 Nm) and 20 sq. ft./88 lb-in (10 Nm) with seal-less damper blades, depending on air friction.

Specifications
Description: Direct Coupled, General Purpose, Non-Spring Return Actuator
Actuator Type: Damper, Valve
Application Type: HVAC
Fail Safe Mode: Non-Spring Return
Control Signal: 2 position, Floating
Supply Voltage: 24 Vac +20%, -15%, 24 Vdc
External Auxiliary Switches Available: Yes, SSW2-1M
Shaft Adapter Type: U-bolt clamp
Manual Operation: Declutch mechanism
Mounting: Direct Coupled
Frequency: 60 Hz, 50 Hz
Rotational Stroke: 95 +/- 3 degrees
Rotation To Open: By Switch
Dual Integral Adj. Stops (3 degree increments)
Rotational Stroke Adjustment: Dual Integral Adj. Stops (3 degree increments)
Compatible Damper Shafts: 1/4 to 1/2 in. square or 3/8 to 5/8 in. round
Power Consumption: 5 VA
Temperature Range: -5 F to +140 F
Environmental Rating: NEMA2

Features
Declutch for manual adjustment
Adjustable mechanical end limits
Removable access cover for direct wiring
Mountable in any orientation
Function selection switch for selecting modulating or floating/2-position control

Specs

Actuator Type:

Floating

Proportional

Two Position

Voltage:

24v

Torque:

44 lb-in

Application:

HVAC

Temperature Range (F):

-5°F to 140°F

Fail Safe Mode:

Non-Spring Return

 

Request a Quote now or call us at 1-800-755-2883 for expert assistance.

Specificationsheet.pdf

Get A Quote

Fill in the form below, or call us now at 1-800-755-2883

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

Full Product Catalog

See our comprehensive product catalog!