Honeywell MN6120A1002 Floating Actuator, Non-Spring Return

These direct-coupled damper actuators provide adjustable modulating control for: air dampers, air handling units, ventilation flaps, louvers, and reliable control for air damper applications with up to 4.6 m2/50 sq ft (seal-less dampers; air friction-dependent).

Features
Control for air damper applications with up to 50 sq ft assuming 3.5 in-lb per sq ft of damper area, velocity independent.
Patented self-centering shaft adapter.
Access cover to facilitate connectivity.
Declutch for manual adjustment.
Mechanical end limits.
Field-installable auxiliary switches.
Rotation direction selectable by switch.
Mountable in any orientation (no IP54 if upside down). Mechanical position indicator.
CE approved. UL approved.

Specifications

Description: Direct Coupled, General Purpose, Non-Spring Return Actuator
Actuator Type: Damper, Valve
Application Type: HVAC
Fail Safe Mode: Non-Spring Return
Control Signal: 2 position, Floating
Supply Voltage: 24 Vac +20%, -15%, 24 Vdc
Number of Internal Auxiliary Switch: 0
External Auxiliary Switches Available: Yes, SSW2-1M
Shaft Adapter Type: Self-centering clamping
Manual Operation: Declutch mechanism
Mounting: Direct Coupled
Frequency: 60 Hz, 50 Hz
Rotational Stroke: 95 +/- 3 degrees
Rotation To Open: By Switch
Dual Integral Adj. Stops (3 degree increments)
Rotational Stroke Adjustment: Dual Integral Adj. Stops (3 degree increments)
Compatible Damper Shafts: 3/8 to 1.06 in. round or 3/8 to 11/16 in. square
Power Consumption: 5 VA
Temperature Range: -5 F to +140 F
Environmental Rating: NEMA2