Honeywell Globe Valve Cross Reference Guide – Johnson Controls, Barber Colman / Siebe

​The Honeywell Globe Valve Cross-Reference Guide serves as a valuable resource for professionals seeking suitable replacements for threaded globe valves from manufacturers such as Johnson Controls and Siebe/Barber-Colman. This guide facilitates the selection process by providing detailed comparisons based on valve size and flow coefficient (Cv) ratings

Ordering Guide 

Understanding Valve Specifications

Each valve’s performance is characterized by its size (measured in National Pipe Thread, NPT) and Cv rating, which indicates the flow capacity. The Cv rating represents the volume of water (in gallons per minute) that a valve can pass with a 1 psi pressure drop. Accurately matching these specifications is crucial to ensure optimal system performance and compatibility.​

Johnson Controls to Honeywell Cross-Reference

The guide provides a comprehensive cross-reference for Johnson Controls’ three-way mixing valves and two-way valves (both push-down-to-close and push-down-to-open configurations). For instance, a Johnson Controls valve with a 1/2-inch size and a Cv of 1.8 (model VG7842ET) corresponds to the Honeywell model V5013N1030, which has a Cv of 2.9. Similarly, a 3/4-inch valve with a Cv of 7.3 (model VG7842LT) matches Honeywell’s V5013N1055 with the same Cv rating. This systematic comparison aids in identifying Honeywell valves that closely align with the specifications of existing Johnson Controls valves.​

Siebe/Barber-Colman to Honeywell Cross-Reference

For Siebe/Barber-Colman valves, the guide outlines equivalents for three-way mixing valves and two-way valves with stem-down-to-close (direct acting) configurations. For example, a Siebe valve measuring 1/2 inch with a Cv of 0.4 (model VB-7213-0-4-01) can be replaced by Honeywell’s V5011N1008, which has a Cv of 0.73. A 1-inch valve with a Cv of 14 (model VB-7213-0-4-08) corresponds to Honeywell’s V5011N1065 with a Cv of 11.7. These cross-references enable users to select Honeywell valves that meet or closely approximate the performance characteristics of Siebe/Barber-Colman models.

Considerations for Valve Replacement

While the guide offers direct replacements based on size and Cv ratings, it’s essential to consider other factors such as actuator compatibility, pressure ratings, and application-specific requirements. Users are advised to verify all valve specifications to ensure the selected replacement valve is suitable for their specific application. Additionally, consulting with a Honeywell representative or a qualified engineer can provide further assurance in the selection process

We stock and ship these products worldwide!

Request a Quote now or call 1-800-755-2883 for expert assistance.