The Fireye 59-471-160 is a pre-wired scanner cable designed for use with Fireye’s 45FS1 and 45UVFS1 flame scanners. This eight-conductor cable measures 160 feet in length and comes factory-wired with a 129-127-6 female quick-disconnect connector, facilitating straightforward installation and reliable connectivity in burner management systems.
Key Features:
-
Length: 160 feet (approximately 48.8 meters)
-
Conductors: Eight
-
Connector: Factory-installed 129-127-6 female quick-disconnect
-
Compatibility: Specifically designed for Fireye 45FS1 and 45UVFS1 flame scanners
Request a Quote now or call us at 1-800-755-2883 for expert assistance.
Wiring Connections:
The 59-471-160 cable features the following wiring connections:
| Pin Number | Wire Color | Function |
| 1 | Black | +24 VDC |
| 2 | Red | Shutter |
| 3 | Green | Flame Signal |
| 4 | White | Common |
| 5 | Blue | Remote File Select (RFS1) |
| 6 | Brown | COMM A – RS485 Communication |
| 7 | Yellow | Remote File Select (RFS2) |
| 8 | Orange | COMM B – RS485 Communication |
Installation Recommendations:
-
Conduit Use: To minimize electrical noise interference, it is advisable to install the scanner cable within rigid or flexible conduit.
-
Separation from High-Voltage Wiring: Ensure the scanner cable is routed away from high inductive wiring associated with substantial inductive loads or high-voltage, high-energy spark ignition systems.
-
Strain Relief: A cord-grip strain relief fitting is pre-installed on the female quick-disconnect. If preferred, this can be replaced with the provided flexible conduit fitting and thread adapter to suit specific installation requirements.