Fireye 129-145-1 Remote Display Mounting Kit

The Fireye 129-145-1 is a remote mounting kit designed for the ED510 display module, facilitating easy and efficient panel installation. This kit includes a mounting plate, gasket, two 8-32 x 1 1/4″ mounting screws, and a 4-foot (1.22 meters) connection cable. When properly installed, it meets NEMA 4 requirements, ensuring a secure and sealed interface suitable for industrial environments.

Key Features:

• Secure Panel Mounting: Provides a reliable method to mount the ED510 display module onto control panels, enhancing system integration.

• Complete Installation Kit: Supplied with all necessary components, including a mounting plate, gasket, mounting screws, and a 4-foot connection cable, ensuring a straightforward installation process.

• NEMA 4 Compliance: Ensures a sealed and robust installation, suitable for demanding industrial applications.

Installation Overview:

1. Panel Preparation: Cut a 3.62-inch (92.0 mm) square opening in the panel face, ensuring the panel thickness does not exceed 14 gauge (5/64″ or 2.0 mm).

2. Gasket Placement: Slide the gasket over the rear side of the ED510 display module.

3. Module Insertion: Insert the ED510 display with the gasket through the prepared panel opening.

4. Mounting Plate Attachment: Position the mounting plate over the rear of the display, aligning the mounting tabs with the slots on the ED510. Secure the plate by ensuring the top tab snaps into place.

5. Securing the Assembly: Insert and tighten the provided mounting screws into the threaded inserts.

6. Cable Connection: Connect the 4-foot cable to the RJ45 connectors on both the ED510 display and the EP or EPD Programmer Module.

For detailed installation instructions and diagrams, refer to the Fireye installation document E-8101.

Request a Quote now or call us at 1-800-755-2883 for expert assistance.