The Asco EF8003G002 Solenoid Valve (8003G2) is a 2-way, pull-type solenoid operator designed for use in hazardous locations. This explosion-proof model delivers 17.1 watts of power and is ideal for actuating direct-acting ASCO valve bodies in Class I, II, and III Division 1 environments. It is built with a rugged epoxy-encapsulated coil and rated for air, water, inert gas, and light oil.
Technical Specifications
- Valve Type: Solenoid Operator, 2-Way, Pull-Type
- Pipe Size: 1/2” NPT
- Flow Factor (Cv): Not Applicable
- Operating Pressure Differential: Not Applicable
- Maximum Fluid Temperature: Not Applicable
- Body Material: Not Applicable
- Seal Material: NBR
- Voltage Options:
- AC (60Hz): 24, 120, 240, 480V
- AC (50Hz): 110, 220V
- DC: 6, 12, 24, 120, 240V
- Watt Rating: 17.1 watts
- Coil Insulation Class: F
- Solenoid Enclosure:
- Standard: NEMA 4X, IP65 (Watertight, Corrosion-Resistant)
- Optional: Explosionproof & Watertight (Types 3-9), Raintight (Types 3, 7, 9)
Key Features and Functionality
- Explosionproof Solenoid Operator: Certified for Class I, II, III Div. 1 use.
- Pull-Type Direct Actuation: For 2-way direct-acting ASCO valves.
- High Wattage Core Lift: 17.1 watts of electromagnetic force.
- Compatible with Multiple Fluids: Air, inert gas, water, and light oil.
- Wide Enclosure Ratings: NEMA Types 3, 4, 4X, 6, 7, 9 compliant.
Compatible Components and Related Parts
- ASCO RedHat II Direct Acting Valve Bodies
- ASCO Rebuild Kit 000000
- ASCO Explosionproof Coil Assemblies
- ASCO Hazardous Location Mounting Kits
Industry Applications
- Hazardous Process Plants: Remote valve actuation in classified areas.
- Hydraulic and Pneumatic Equipment: Explosionproof flow control.
- Refineries and Chemical Terminals: Valve operator for flammable media.
- Tank Farms and Fueling Stations: Solenoid interface for shutoff valves.
- Mining and Dust Zones: Safe actuator for Class II/III systems.
Compliance and Approvals
- CSA Certified
- Listed 106R
- NEMA Types 3, 3S, 4, 4X, 6, 6P, 7, 9
Installation and Operational Notes
- Do not install in atmospheres with ignition temps below 165°C.
- Remove power before disassembling.
- Use the correct return force (11 oz AC, 5 oz DC) to overcome magnetism.
- Ensure the electrical conduit is sealed for Class I use.
- Mount using approved hardware in the certified enclosure.
We ship this product worldwide! Delivery is normally stock.
Request a Quote now or call us at 1-800-755-2883 for expert assistance.