Asco 8040H007 Solenoid Valve 8040H7
Asco 8040H007 Solenoid Valve 8040H7

The Asco 8040H007 Solenoid Valve (8040H7) is a compact, direct-acting shutoff valve built for fuel gas service in ignition systems and pilot lines. This normally closed valve is ideal for low-flow applications requiring high-pressure tolerance and fast-acting shutoff performance in combustion safety systems.

Technical Specifications

  • Valve Type: Direct Acting, Normally Closed, 2-Way
  • Pipe Size: 1/4″ NPT
  • Flow Factor (Cv): 1.0
  • Gas Capacity: 59,000 Btu/hr
  • Operating Pressure Differential:
    • Minimum Operating Pressure: 0 psi
    • Maximum Operating Pressure: 15 psi
  • Maximum Fluid Temperature: 125°F (52°C)
  • Body Material: Aluminum
  • Seal Material: NBR
  • Voltage Options:
    • AC (60Hz): 24, 120, 240V
    • AC (50Hz): 110, 220V
  • Watt Rating:
    • AC: 6.1 watts
  • Coil Insulation Class: F
  • Solenoid Enclosure:
    • Standard: NEMA 4X, IP65 (Watertight, Corrosion-Resistant)
    • Optional: Explosionproof & Watertight (Types 3-9), Raintight (Types 3, 7, 9)

Key Features and Functionality

  • Pilot Line Control: Supports safe ignition and low-flow shutoff.
  • Direct Acting Design: Operates without a pressure differential.
  • Compact Valve Body: Fits into tight burner panel layouts.
  • High Pressure Tolerance: Rated for up to 15 psi inlet gas.
  • Integrated Test Tap: Downstream NPT plug provided for checks.

Industry Applications

  • Boiler Ignition Control: Secures gas to pilot burner systems.
  • Pilot Manifold Assemblies: Used in multi-valve pilot circuits.
  • Hazardous Area Burners: Explosionproof variant suited for Class I areas.
  • HVAC Heating Panels: Provides safe fuel cutoff in diagnostics.
  • Oven Start-Up Safety: Shuts off pilot gas during system interlocks.

Compliance and Approvals

  • UL Listed
  • CSA Certified
  • FM Approved

Installation and Operational Notes

  • Install the valve in any orientation required by the system layout.
  • Seal all NPT threads using approved pipe compound.
  • Verify power input matches the voltage shown on the valve coil.
  • Use the downstream tap to confirm pressure during testing.
  • Cycle the valve to confirm full shutoff before putting it into service.

Series Catalog

Asco 8040 Gas Shutoff Valves

 

We ship these products worldwide! Delivery is normally stock.

Request a Quote now or call us at 1-800-755-2883 for expert assistance

Get A Quote

Fill in the form below, or call us now at 1-800-755-2883

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

Full Product Catalog

See our comprehensive product catalog!